Linux in Details:-

Linux in Details:-

Introduction

Linux is a very famous, open-source operating system. Many developers use Linux for development purposes because of its high throughput. As a student or even a professional in the software industry, it is very essential to have knowledge of the Linux OS. Many programmers prefer Linux over Windows OS for development purposes due to a variety of reasons such as the security of the Linux Operating System is better than Windows, the Linux terminal is way superior to the windows command line in many ways, etc.

What is Linux and Why use it?

Linux is an open-source operating system whose source code is available for modification and commercial and non-commercial distribution under the guidelines of the GNU General Public License.

GNU/Linux is a Unix-like operating system made up of different OS components and services that create the Linux OS. GNU stands for GNU's not Unix, which makes the term a recursive acronym, or an acronym in which one of the letters stands for the acronym itself.

Linux has a number of advantages over the Windows operating system and is used widely because of these advantages Below are a few listed:

  • The major advantage of the Linux Operating System is that it is a freely available open-source OS. This means that the source code of the Linux Operating System is available openly in the market (on the internet) and anyone can study it, modify it and even send it forward for commercial uses too. However, the major use case of it being an Open Source OS is the study of the Operating System itself. If anyone has to understand the Operating System as a core subject, it's working, and what are the things kept in mind while designing an operating system, you can simply look up the code of Linux OS and get a plethora of ideas.

  • Privacy and Security are very important for the users, especially nowadays, when hacking and other cyber malpractices have become so common. Linux maintains the privacy of the user and is a lot more secure than Windows OS. However, this does not mean that Linux is completely secured and can never be attacked. This simply means that it is more secure than Windows and it does not even require any antivirus software to be installed within it.

  • Linux Operating System is highly stable and does not hang or requires to be restarted again and again.

  • Linux is fast and easy to install and can be installed very easily from the internet.

  • Linux is network friendly.

Linux Commands Tutorial: Basics to Advanced

1. File and Directory CRUD Navigation Commands

CRUD stands for Create, Read, Update, and Delete. CRUD operations are said to be the basic operations on any file or directory or database. Even if you are not a Linux User, file and directory CRUD operations are something that you should be comfortable with.

COMMANDMEANINGEXAMPLE & SYNTAX
ls (list all directories)Lists all the files and directories inside the current directory in which you are.Syntax: $ ls
ls -RLists all the files and directories inside the current directory as well as all the files and directories of the sub-directories as well.Syntax: $ ls -R
ls -aLists all the files and directories in the current directory and also lists the hidden files (such as .git files). However, this command does not list the files and directories of the sub-directories.Syntax: $ ls -a
ls -alLists files and directories of the current directory along with the details like permissions (read, write, execute), owner, file/dir size, etc.Syntax: $ ls -al
cdThis command is used to move to the root directory.Syntax: $ cd
cd ~Same function as cd i.e. move to the root/home directory. Please note that there is a space between cd and tilde (~) symbol.Syntax: $ cd ~
cd ..Move to one level up directory.Syntax: $ cd ..
cd dirNameMove to a particular directory from the current directory. Note that you can only move down the directory and not to the directories in the above level.Example: In the command shown on the right, we move from the root directory to Desktop.Syntax: $ cd Desktop
mkdirThis command creates a directory.Example: The command shown in the right will create a directory named “exampleDir” in the current directory in which we are.
Syntax: $ mkdir exampleDir
cat > fileNameThis command creates a file in the current directory.Example: The command shown in the right creates a new file in the current directory and the name of the file will be file1 with an extension of ‘.txt’.
Syntax: $ cat > file1.txt
cat fileNameThis command displays the content in a file. If a file is not present in the current directory, it gives a message showing no such file exists.Example: The command shown on the right displays the content of the file file1.txt. “Hello there!” is the content inside it. Syntax: $ cat file1.txt Hello there!
cat f1 f2 > f3This command joins the content of two files and stores it in the third file. If the third file does not exist, it is first created and then the joined content is stored.Example: The command in the right stores the joined content of file1 and file2 in file3. File1 has “Hello there!” and file2 has “What’s up?” in their content. We have displayed the content of file3.Syntax:Syntax:
$ cat file1.txt  file2.txt > file3.txt
$ cat file3.txt Hello there! What’s up?

rmdir dirName

This command is the remove directory command. It deletes a directory.

Example: The remove directory command for deleting a directory named “exampleDir” is shown on the right.Syntax: $ rmdir exampleDir

mv fileName “new file path”

This command is the move file command. It moves the file to the new path specified.

Example: The mv command moves the file file1.txt to “Docs” directory.Syntax: $ mv file1.txt “Docs/”

mv fileName newName

This command changes the name of the file from the old name i.e. the fileName to the newName. 

Example: The command in the right changes the name of the file file1 to file2.Syntax: $ mv file1.txt file2.txt

find <starting position to search> <expression determining what to find> <options> <what to find>

This command is used for walking a file hierarchy. It is used to find files/directories and perform operations on them. We can search by file, folder, name, creation date, modification date, etc. There are a number of options available. For instance, exec searches the file that meets the criteria and returns 0 as exit status for successful command execution. 

Example: The command in the right is for searching a file with the name file1.txt in the Docs directory.Syntax: $ find ./Docs -name file1.txt

grep <options> pattern fileName

The full form of this command is a global search for regular expression and printout. This command searches a file for a particular pattern of characters and displays all the lines that contain that pattern. The pattern being searched is called a regular expression (regex). There are a lot of <options> available. For instance, c is an option that is used to only count the number of lines in the file that matches the pattern.

Example: The command to count the number of lines that have “abc” in them in the file file1.txt is shown on the right.Syntax: $ grep  -c “abc” file1.txt

2. System Information Commands

These are some of the general-purpose system information commands that are important to know and easy to remember.

COMMANDMEANINGEXAMPLE & SYNTAX
historyThis command displays the list of all the typed commands in the current terminal session.Syntax: $ history
clearClears the terminal i.e. no previous command will be visible on the screen now.Syntax: $ clear
hostnameShows the name of the system host.Syntax: $ hostname
hostidDisplays the id of the host of the system.Syntax: $ hostid
sudoAllows a regular user ($)to run the programs with the security privileges of a superuser or root(#).Syntax: $ sudo
apt-getThis command is used to install and add new packages.Syntax: $ apt-get
dateThis command is used to show the current date and time.Example: The command and its output are shown on the right.Syntax: $ date

Fri Feb 25 14:58:08 IST 2022 | | cal | Shows the calendar of the current month. | Example: The command cal and its output is shown on the right.Syntax: $ cal | | whoami | This command displays the name with which you are logged in. | Example: The command is typed in and it shows the username with which the user has logged in.Syntax: $ whoami Guneet Malhotra | | whereis [options] fileName | This command is used to find the location of source/binary file of a command and manuals sections for a specified file in Linux System. This command is similar to the find command but this command is faster as it produces more accurate results by taking less time compared to the find command. There are again a number of options available. | Example: The command to locate apropos command in Linux System is given on the right.Syntax: $ whereis apropos |

3. File Permission Commands

There are 3 types of people who can use a file and each type has 3 types of access to the file. This is shown in the diagram given below:

The diagram shows that there are 3 types of people accessing a file and they are:

  1. User (u)

  2. Group (g)

  3. Others (o)

Also, the access that we want to give to each of them is of three types:

  1. Read (r)

  2. Write (w)

  3. Execute (x)

So, each of them can have 0 or more out of these 3 permissions. Now let us understand the Linux commands that help us give these permissions to the files.
One important thing to note here is that before these 9 slots of the user, group and others (read, write and execute permissions), there is also one another slot. This slot is for special files. For instance, if you something as drwxr--r--, here ‘d’ shows that it is a directory of which you are viewing the permissions. Further, rwx means that the user has all the three permissions where as r-- means that the group has only read permission and the write and execute permissions are not there with the group. The same is the case for others (another r--).

  • The chmod Command:

Before we jump into the Linux file permission commands and see some examples, it is very important to understand this chmod command in detail first as understanding this command completely will clear the entire concept of file permission commands. The chmod command stands for “change-mode” which means that using this command, we can change the mode in which some user is able to access the file. This command is used to change the file permissions. The syntax can be either using symbols (characters) or numbers. We will see that in detail.

  • Symbolic Method for granting permissions:

This is the first method of chmod command using which we can give permissions. The basic syntax is as follows:

chmod [ugoa…][-+=]perms…[,....] FILE….

Let us understand this syntax in detail.

The first set means the type of person to give access to. Here:

  1. u → Stands for User

  2. g → Stands for Group

  3. o → Stands for Others

  4. a → Stands for All the users i.e. instead of writing ugo, we can just write a.

If the user's flag is not included in the command i.e. we do not mention for which kind of people out of u, g and o, are we changing the permissions for, by default, it takes a i.e. all the users.

The second set is the set of operators. Let us see what they mean.

  1. - → removes the mentioned permission

  2. + → adds the mentioned permission

  3. = → Changes the current permission to the mentioned permission. IF no permission is mentioned after using the = operator, all the permissions from the mentioned class are removed.

The perms stand for permission and ‘,’ is used to separate different permissions. Let us now see the Linux commands using the symbolic notation of chmod.

COMMANDMEANINGEXAMPLE & SYNTAX
ls -l fileNameThis command is used to show the file permissions along with the owner and other details of the specified file.Example: The file permissions along with the owner and other details is shown for the file file1.txt on the right.Syntax: $ ls -l file1.txt -rw-r--r-- 1 Guneet Malhotra 197121 0 Feb 25 10:51 file1.txt
rThis command represents the read permission.Example: The command shown in the right adds the read permission to the o (other) class for the file file1.txt.Syntax: $ chmod o+r file1.txt
wThis command represents the write permission.Example: This commands adds the write permission for a(all) i.e. user, group and others.Syntax: $ chmod a+w file1.txt
xThis command represents the execute permission.Example: This command adds the execution permission for the user.Syntax: $ chmod u+x file1.txt
  • Numerical Method for granting file permissions

There are numeric codes for each permission. They are as follows:

  1. r (read) = 4

  2. w (write) = 2

  3. x (execute) = 1

  4. No permissions  = 0

The permissions number of a specific user class is represented by the sum of the values of all the permissions. For instance, if the user has read and executed permissions, but not the write permission, then the permissions number for the user will be read (4) + execute(1) = 5.

For instance, if we have to write a command to provide read and write permissions to the user, group and others, there can be many ways of doing so. Let us see one symbolic way:

  • Symbolic Way

$ chmod ugo+rw file1.txt

We can write this in a numeric way as shown below:

  • Numeric Way

$ chmod 666 file1.txt

Explanation: We have already studied that if we do not mention u/g/o then by default the permissions are applied to all. Also, read + write = 4 + 2  = 6. We have written 6 thrice because of applying the permissions to user, group and others. So, read and write permissions are applied to the user, group and others (666) for the file file1.txt.

4. Hardware Information Commands

Let us now see, some of the hardware information commands that give us the information about the hardware that we are using.

COMMANDMEANINGEXAMPLE & SYNTAX
cpu-infoThis command is used to display the information about your CPU. Note that this command is not available by default. It can be used after installation of the necessary package using sudo apt install cpuinfo.Syntax: $ cpu-info
free -hThis command is used to display the free and used memory. -h is used for converting the information (to be displayed) to human-readable form.Syntax: $ free -h
lsusb -tvList all the USB connected devices.Syntax: $ lsusb -tv
cat /proc/meminfoGives the information about memory like total and occupied and so on.Syntax: $ cat /proc/meminfo
duThis command stands for disk usage and is used to estimate the space usage for a file or directory.Example: The following command gives the size in human-readable form for the Desktop folder.Syntax: $ du -h Desktop

5. File and Directory Compression Commands

The files can be compressed and then extracted to save the storage. We see this happening many times in our daily lives that we have to compress some file to send it or we have to extract a downloaded file. There are several commands for file compression in Linux given below:

COMMANDMEANINGEXAMPLE & SYNTAX
gzip fileNameThis command is used to compress a file with gzip compression.Example: The command to zip file1 using gzip compression is shown on the right.Syntax: $ gzip file1
gunzip fileName.gzThis command is used to unzip a file that has gzip compression.Example: The command to unzip fileDemo.gz file with gz compression is shown on the right.Syntax: $ gunzip fileDemo.gz
tar cf myDir.tar myDirThis command is used to create an uncompressed tar archive.Example: The command to create an uncompressed tar archive for the directory demoDir is shown on the right.Syntax: $ tar cf demoDir.tar demoDir
tar cfz myDir.tar myDirThis command is used to create a tar archive with gzip compression.Example: The command to create gzip tar archive for the directory demoDir is shown on the right.Syntax: $ tar cfz demoDir.tar demoDi
tar xf fileThis command is used to extract the contents of any type of tar archive.Example: The command to extract the content of demoFile tar archive is shown on the right.Syntax: $ tar xf demoFile

6. Environment Variable Commands

COMMANDMEANINGEXAMPLE & SYNTAX
envThis command displays all the environment variables.Syntax: $ env
echo $VariableThis command displays the environment variable.Example: The command at the right will display the INSTANCE environment variable.Syntax: $ echo $INSTANCE=
unsetThis command removes a variable.Syntax: $ unset

7. User Management Commands

COMMANDMEANINGEXAMPLE & SYNTAX
sudo adduser usernameThis command is used to add a user.Syntax: $ sudo adduser username
sudo passwd -l ‘username’This command is used to change the password of a user.Example: Command to change the password for user1 is shown.Syntax: $ sudo passwd -l 'user1'
sudo userdel -r ‘username’This command is used to remove a newly created user.Example: Command to delete the newly created user1.Syntax: $ sudo userdel -r 'user1'
sudo usermod -a -G GROUPNAME USERNAMEThis command is used to add a user to a particular group.Example: The command to add user2 to group1 is shown.Syntax: $ sudo usermod -a -G group1 user2
Sudo deluser USER GROUPNAMEThis command is used to remove a user from a group.Example: The command to delete user1 from group1 is shown.Syntax: $ sudo deluser user1 group1
fingerThis command shows the information of all the users logged in.Syntax: $ finger
finger usernameThis command gives information about a particular user.Example: The command to get information about the user1 is shown on the right.Syntax: $ finger user1

8. Networking Commands

COMMANDMEANINGSYNTAX
dirThis command is used to display files in the current directory of a remote computer.Syntax: $ dir
put fileThis command is used to upload ‘file’ from local to the remote computer.Syntax: $ put file
get fileThis file is used to download ‘file’ from remote to the local computer.Syntax: $ get file
quitThis command is used to log out.Syntax: $ quit

9. Process Commands

COMMANDMEANINGEXAMPLE & SYNTAX
bgThis command is used to send a process to the background.Example: The process with id 1 is sent to the background by providing its id to bg.Syntax: $ bg %1
fgThis command is used to run a stopped process in the background.Example: The process with id 1 is brought to the foreground with the help of this command.Syntax: $ fg %1
topThis command is used to get the details of all active processes.Syntax: $ top
psThis command is used to give the status of running process for a user.Syntax: $ ps
ps PIDThis command gives the status of a particular process.Example: Displays the status of the process with id 12230.Syntax: $ ps 12230
pidofThis command is used to give the process ID of a particular process.Syntax: $ pidof bash